top of page

How to Install Your Own Kitchen Cupboards: A Step-by-Step Guide

Nov 2
3 min read

Updated: 3 days ago

Installing your own kitchen cupboards is one of the most rewarding projects you can take on, and it can save you a large part of what a contractor charges. It isn't magic. Professional installers follow the same steps every time, in the same order. Here they are.


1. Measure the room

Measure every wall at the bottom, middle and top, and note the ceiling height, windows, doors, plug points, water and drain points. Check whether the walls are square and the floor is level: in most South African homes the walls are brick and rarely perfectly straight. Small differences don't matter, as long as you know where they are before you design.


2. Design it

Draw the kitchen before you buy anything. A free 3D program like SketchUp lets you place every unit, check the doors and drawers open without hitting anything, and see the finished kitchen from every side.


A kitchen designed in SketchUp before ordering the cutting list

3. Make a cutting list and a hardware list

A cutting list names every part (sides, bottoms, tops, backs, shelves, doors, drawer parts, plinths) with its finished size, its material and which edges get edging. Most cupboards are 16 mm melamine with 1 mm edging on the edges you see. Give the finished sizes: your cutting and edging supplier subtracts the edging themselves.

The hardware list covers concealed hinges, drawer runners, adjustable legs and plinth clips, handles, screws, and the plugs and screws to fix the units to the wall.


4. Order from a cutting and edging supplier

Send the cutting list to a board supplier who cuts and edges to size. Check every line twice before you order: one wrong size means a wasted part and a second trip. Ask for every part to be labelled, so you can find it again.


5. Build the carcasses

Assemble each unit on a flat surface: sides, bottom, top rails and back. Check that it is square by measuring the two diagonals: they must be the same. Fit the adjustable legs to the base units before they go in.

Build one unit first and check it properly before you build the rest. That is why our course starts with a single cupboard-style side table: every mistake you make there is one you won't make on the kitchen.


Student checking a melamine cupboard carcass in the BB Craft School workshop

6. Install the base units

Find the highest point of the floor along the wall and start there. Set each unit level with its adjustable legs, join the units to each other so they line up at the front, then fix them to the brick wall with the right plugs and screws.


7. Hang the wall units

Mark a level line on the wall for the bottom of the wall units, and fix them securely to the brick: a loaded wall unit is heavy, so use proper plugs and screws, never only the ones in the box.


8. Fit the worktop

Cut the worktop to length, make the sink and hob cut-outs, seal every cut edge against water, and fix it from below through the top rails.


9. Doors, drawers and plinth

Hang the doors and adjust the hinges until the gaps are even, fit the drawer fronts, clip the plinth onto the adjustable legs, and finish with the handles and a clean silicone line where the worktop meets the wall.


A cottage kitchen installed near Somerset West, filmed for the online installation course

Common mistakes

  • Designing before measuring properly, or forgetting the plug points and plumbing.

  • No edging on an edge that shows, or edging where it doesn't fit.

  • Starting the base units at the low point of the floor.

  • Fixing heavy wall units with weak plugs.

  • Building every unit before checking the first one.


Learn it step by step

Our Online Cupboard and Kitchen Installation Course takes you through all of this in order: the materials, hardware and tools, designing in SketchUp, building your first unit, planning your own project with a proper cutting list, and real built-in cupboard and kitchen installations. It is a founding member course, and everyone who joins gets every future section at no extra cost.


Prefer to learn in person? Our 3-day DIY Kitchen and Cupboard Installation course at Lourensford is paused for now. News about upcoming in-person courses goes out in our newsletter first.


bottom of page